Відео

Video cok faydalı mekik alt milin küçük dişli çürümüş bize bir önerin varmı İstanbul da yok bu dişli

❤❤❤

how do i remove the wheel on my sewing machine

I am interested this masine purchase this masin how is possible

How is possible parches masin

Hi Gary, thanks a lot for this video, who helped me a lot while servicing a Phoenix KI-10 found laying on the road. She works perfectly now! One question: did you know where in can find those special needles? The one on the machines is stamped with 12-80, and has the grooves like yours in the video. Thanks!

Thank you for this. I was ready to rip my hair out.

This is wonderful info! I have this exact machine with this exact problem! Thank you so much! BTW what oil do you recommend for this machine? Cheers

Thank you, your tutorial is perfectly clear 😊👍🏻

Excellent video, perfect lighting and close ups were super sharp. Sir, your video is the best close up, correct lighting I have seen so far!!! So thankful for you sharing your knowledge! Thank you again for fine work on video! 👍👏👏❤😊🫡

thank you! i love my little 830. It's a work horse. i have new berninas too, but i go back to the 830 for mending and repairs on heavier fabrics

Is this Elna TX the latest or the best version of The Lotus series?

I got mine from goodwill for 14.49 barely anything is wrong but it does need some minor adjustments. Surprisingly the cam is in really good shape But I also have the 3d printer files and a 3d printer so I'm good on that. though it didn't come with the power cable so I ordered on on ebay and freed up the stuck knobs with some good ol pb blaster.

Thank you thank you! You saved me over $100 Canadian. Right at the part where you said don't lose the E clip, it popped out of my hand and took me half an hour to locate. LOL Other than that, brilliant video. Thank you so much. Even though mine was a Kenmore, it was identical.

It is too bad that you are on the other side of the earth from me. I would love to work as your apprentice a while.

I hope you can help me! Working on a Babylock 5260D(N) and the feed dogs do not move at all. Looks very clean in machine and screws as you showed in this video seem tight. Any other suggestions please?

Love it

Hi I've got 4020 cant get bobbins case we're I get please wow got it as a gift laying around love I make bags with it wow there no words for this machine wow I sold empisal for 10 years love them to

The waer on this machine in the video is visible but it still does the job. I learnt how to sew on my mothers "Crocodile" as we call them here in Sweden and was very sad as she changed is for a newer machine. I have now bough one for myself and it is very nice to sew on. The machine i bought for 35 USD was with all the extras but did not work properly. Some oil later the machine was back in working order with no extra maintenace needed. Amazing quality. The gearbox for slower and more powerful sewing is a feature that i really like but lacks on newer machines. The automatic disengagement of the machine when vinding the bobbin is also one step ahead of many machines even today. I think the quality of this machines is at the pinnacle of machanic sewing machines. Bernina and Pfaff have thier own take on failfree high quality, undestructable machines from the same period, but i find the "anti jamming feature" on the Husqvarna one point above the rest. The only downside is that the Zig-Zag is not especially wide compared to modern machines. But you can´t have it all for 35 USD. (Going rate for a working machine like this in Sweden is about 150 USD.)

Thank you so much

Do you know how to get the top cover off this model because mine has no screws to take the handle off, I'm trying to get to the tension discs as there is no tension on 1,2 3 dials, should it be thrown away, thank you.

June 27 2024, So much thx I just found your video & needed it it so much ! Although sewing all my life with older & newer singer machinesI I had never encountered the 700 machines- a learning curve to be sure and am intrigued. I picked up a 750 thinking it was like most singers yikes! I have never encountered a self bobbin winding machine - totally scary but am trying… your vids have given me hope

I got this for $10 and the gear is certainly cracked, even worse I broke that oil wick and I would need to replace that I believe or it may not work? Is it worth it for me to try and replace the gear myself? My reasoning is I can’t afford a serger and I saw this broken one for $10 and thought I could fix it. It seemed very taunting

Hello! I got a second hand New Home (Janome) My excel 23L. The straight and zigzag stitches move forward, but the other stitches go backward without pressing reverse. Any ideas on how to fix this problem? Thank you!

I've got one arriving today , I'm super excited. But I'm going to service it first . There's plenty of advice and walkthroughs on the internet.😊

You sure gave it your best shot. The electronic part seems to work pretty good tho, this was very interesting to watch.

I have a Bernina 940. The needle breaks because it hits the rotary bobbin case at the wrong time. Can you do a video about how to fix that issue, please?

You did everything but CPR.

Fantastic video. Very helpful

I also compliment u on your demo

Very good in South africa most people go for empisal affordable far less features no bin now drawer colour coding Very less

So, if the bobbin winder spins very slowly, or not at all…is it typically the rubber tire needing replacement? I finally got it to stitch, but I cannot make a bobbin anymore. Tried to remove cover but no luck accessing rubber; hoping there’s a # on it. I cannot find my model online either, for the rubber tire size; Euro-Pro X 7130. Is there a compatible make/model?- they never name mine on Amazon or sewing parts sites. Frustrated.

Thanks so much! Ripper little machine.😁 A full service on a Janome SR2100 would be fantastic!

Thank you. Just received another Elna SP that did not have it's cover on correctly and for the life of me I could not remember how it goes on correctly. Not I can confidently fix it and put it in my car to take home.

Hi, I serviced a Singer 15 nostalgia copy just recently. Your machine here has distinct similarities under the bonnet as it were, even to the position of the thread tension unit. In fact I'd say it was modern coach-work on a 15 copy chassis. Also there's the copyright breach avoider of "The Singer Company" on your machine instead of The Singer Manufacturing Company. Hope this helps. Regards Geoff

Thank you ❤

Nice explain

This was my first new sewing machine purchased about 1978. My husband brought it for me I was using an old green straight stitch machine to sew nursing uniforms for work and he said I needed something better. We got the cabinet to go with it. I used it regularly until about 2018 when I brought a new computerized Juki. Sadly it is just sitting now. 😢

A really fantastic video. I was able to change the gear and re-set the timing which was a bit tricky but got there in the end. I realise too that it was me who destroyed the gear by pushing through some tough material with the wrong needle. I would not have realised that was why without your help. I sourced a gear from Auckland Sewing and I am up and running again. Really appreciate your making this video too. I have now subscribed!!!

Thanks for sharing this video, I'm glad to see Alice helping you, she thinks it's headed for cat a stroffic failure too

What type grease do you use?

Just received my looper gear yesterday. Please show how to remove and replace. I would love to get this thing running.

My bernina overlocks live in my basement, they don’t see the light of day and yet the plastics are all yellow.

Huh also don't have the same needle position knobs!mines a knob on the back

Do you have any suggestions on where to source a motor for one of these babies? Or even a pedal for the og motor?

I recently bought my wife a singer 774 model at an auction. When I got home the needle was positioned to the far right yet the needle position dial indicates Center. Unfortunately the needle isn’t bent. Is the needle centering adjustment difficult? It uses a vibrating mechanism arm that I was looking at to see any obvious screws but didn’t see any obvious adjustments. Thanks for your videos they are a help.

My is exactly the same noise 😢

I have my Mom's old White 999 sewing machine from the 80s and I love it. She's an ugly duckling but she's a smooth running workhorse and easy to maintain. I just today picked up this White 534 serger (1985 I believe). I know the looper gear is broken - first thing I checked based on this video - but I only paid $35 USD for the machine, so no big deal. The part is $50 USD here and hoping that will get her running. Will find out when local shop opens if they can do the repair and for how much. In the meantime I will work on cleaning this filthy girl up. My husband said he would just by me a new one - only a couple hundred bucks on Amazon he said - I told him no, thank you though, as I know those will be all plastic and cheaply made. I know if we can get this old solid hunk of steel running again she'll probably out live me.

Hello, I have a BERNINA 117K, the needle position is Stucked at the left how to fix it?

Hello, I have a BERNINA 117K, the needle position is Stucked at the left , how to fix it?